Are you tired of your truck’s audio system lacking the bass and punch that you desire?
Look no further because we have tested and reviewed the best subwoofer setups for crew cab trucks in 2023.
With years of experience and expertise in this niche, we understand the struggle of finding the perfect setup for your truck.
Our recommendations are thoroughly tested and guaranteed to take your audio experience to the next level. Get ready to feel the thump of every beat and enhance your driving experience with our top picks. Let’s dive in!
Best Subwoofer Setup for Crew Cab Truck Reviews
- Our Top 8 Picks
Below we have Reviewed our top 8 Best Subwoofer Setup for Crew Cab Truck. So pick them according to your need and budget.
Rockford Fosgate knows that without bass, life can’t be the same.
Anyone who has to drive for extended periods of time has dealt with the pain that is blasting your ears at high volumes.
The Punch P300-10T solves this by giving you a subwoofer enclosure with a built-in amplifier so you can feel your music vibrating in your chestnuts!
With an efficient sealed enclosure that provides optimum sound quality, your system will have a richly detailed low end with minimal distortion.
The rugged industrial vinyl coating protects it wherever you choose to install it. You can use the low-pass crossover, phase switch, and bass boost to adjust the subwoofer for the best results in your vehicle.
It has high- and low-level inputs so you can connect it up to any system. Plus, this subs comes complete with its own remote knob so you can control what’s happening from inside of your ride!
You can use the speaker-level inputs for connection to factory systems or traditional line-level inputs for connecting into an aftermarket system. Featuring an impedance optimized high output 10″, the enclosure is intended as a slim design that adds good vibes wherever it’s used!
The Rockford Fosgate P300-10T will be our top pick for the Best Subwoofer Setup for Crew Cab Trucks.
Related Posts –
The second Best Subwoofer Setup for Crew Cab Truck is from the Pioneer TS series.
The Pioneer TS-WX1210A is a 12″ subwoofer that has all the power you could ever need.
With peak ratings of 1300W, this sealed enclosure will get any party started no matter the occasion.
With 350w RMS and preloaded with a single 12″ subwoofer, this low-frequency shaker can shake up any room to high levels without distorting or cutting out at any point due to its dedicated class D amplifier for consistent performance altogether.
The amp also features cross overs from 0-12dB bass boost remote knob included other features include carpet finish, cellulose fiber cone urethane surround frequency response 20 – 125 sensitivity 114dB.
You’ll never miss out on bass notes when it all spills out during long commutes.
Equally perfect on booming basses or perfected musical nuances their flexibly adjustable controls offer an unparalleled user experience.
To ensure flexibility in setup positions the built-in low-level RCA outputs allow connection to virtually any external amplifier or system component!
This Sealed Enclosure Active Subwoofer with Built-in Powerful amp aims to remind the user of that rule when they are up close and personal in an environment where you need to calm down your boomage.
Rockford Fosgate R2S-1X12 is the perfect amplifier enclosure for any rider looking to add some sound to their life.
With a loaded depth of 3.25″ on top and 5.25″ on the bottom, this slim-line shallow loaded enclosure can fit in tight spaces due to limited seat travel in cab trucks.
Add this box with high-density carpet, 5/8″ MDF construction, high current binding posts, and your amp will know what it feels like to be home!
The slim-line depth means this sound quality product will fit in small spaces that other products can’t even dream of touching.
Finished with fluffy high-density carpet for all-around luxury, you can stage your donk for days!
The amplifier produces high-quality, rich bass to just about any size speaker you have because it’s able to produce 250 watts of pure rockin’ power when connected to an ordinary car stereo.
The rugged design ensures you’ll be cranking out the bass until well into the next millennium.
LOPRO8 amplifiers are the last word in broadcast power and quality.
In order to maintain your vehicle’s balance, LOPRO outputs have been engineered to operate within tightly controlled tolerances so as not to draw energy from other amplification channels.
Once you experience a day drive or a long haul with a Sound Storm Laboratories amplifier, you will never want it any other way.
When you need to pump up your music with some serious bass, the Sound Storm Laboratories LOPRO8 is for you.
This amplified subwoofer has 600 watts of max power to give your car an extra boost in sound quality. With a MOSFET power supply, you get improved switching speeds, better performance with less power from the driver. The unit can be connected via speaker-level inputs or line-level inputs to suit any type of system setup.
You’ve always wanted your sound system to be the best. But there’s one problem: you don’t know how to install them, and your friends think they’re too complicated.
Sound Storm Laboratories has just released the perfect product for you! We at LOPRO8 hope that this car subwoofer amplifier will increase the enjoyment of your time spent listening to music in your vehicle.
Let us tell you about all of its features. This 600-watt amplified car subwoofer is equipped with a MOSFET power supply which makes it easier for starting up long loads under heavy voltage requirements – no more waiting 20 seconds for startup!
And it comes speaker level inputs so if you have an aftermarket radio with RCA outputs, all.
Whether you are looking to have the power of 8 subwoofers with 1 amp, or just want an easy way to replace an old speaker in your factory radio system, this is a perfect choice.
This powerful, compact enclosure is perfect for those looking to enhance their low end with a straight-forward 8″ woofer and a built-in 300-watt amp. The Punch P300-8P is the easy way to get more bass on your system!
The Rockford Fosgate Punch 300-8P 8″ Subwoofer is a universal “all in one” self-contained subwoofers enclosure with a built-in amplifier for dropping bass in any factory or aftermarket system.
It Features an adjustable 12Db/Octave low pass crossover, onboard adjustable Bass Boost EQ, and onboard phase switch the P300-8P Punch packs a ton of features into its compact size while pushing out incredible sound from its 8-inch high power woofer.
For a quick installation just find a spot to mount the powerful amp and plug it up to either speaker-level inputs for connection to factory systems, or traditional line-level inputs for aftermarket systems.
What’s even better is that this mini powerhouse comes equipped with its own settings like an adjustable bass boost and crossover for your tunes to be cranked up to the next level!
Get deeper bass out of an undersized space.
The Pioneer TS-SWX2502 10″ Shallow-Mount Subwoofer provides better sound quality than traditional subwoofers with its oversized cone structure and MICA injected molded resin for a rigid and durable cone producing the accurate bass.
It also achieves ultra-high volume levels, giving you incredible deep bass to fill your cabin with deep, rich music that will shake the toughest drivers in your truck.
This subwoofer is designed to perform in small enclosures or spaces that traditional subwoofers can’t fit, like behind the backseat of pick-ups, where it still offers up powerful bass performance thanks to 500 watts max power handling at 2 ohms assures you don’t.
For truck drivers who crave some backcountry thumping, the Pioneer TS-SWX2502 will be a sure-fire hit.
Formulated with tough drivers for an accurate balance of bass and mids, the Pioneer TS-SWX2502 is tough enough to stay put in tight spaces or handle being mounted under your backseat.
With MICA injection-molded cones and poly surrounds, this subwoofer is built to last so you don’t have to worry about a thing while enjoying sweet airtime on country roads.
The other Best Subwoofer Setup for Crew Cab Truck is again from Pioneer TS models.
With a compact, space-saving enclosure for efficient placement in modern cars and trucks, the Pioneer TS-A2500LB is easy to install. But it’s not all about being easy.
The Subwoofer features a glass fiber and mica injected polypropylene cone with a 2-ohm single voice coil so it can withstand 1200 watts of continuous power or 300 watts RMS.
The surround is rolled butyl rubber to keep sound intact without distortion, protecting the steel mesh grille so your pricey car doesn’t suffer any dings or scratches.
And there are plenty of options for getting this sub installed—footing pegs that let you trim to fit around seats, doors, dashboards; removable cushions.
This incredible subwoofer features a full grille with a down-firing structure that can be installed behind or under seats, in an enclosure, or in the trunk.
Whether it’s for an event, a top-of-the-line cinema system, or a car audio upgrade, you can determine and tailor your listening experience with unmatched clarity and precision which only Pioneer could bring to life.
The innovative design of this speaker allows you to install it however you want and still maintain your sense of style. Let your vehicle make a statement by adding this high-quality Pioneer TS-A2500LB today!
8. KICKER C12
The Kicker C12 really delivers, don’t you want the next breakdance party to be your own?
Don’t miss out on any more car shows and other free parking spots. Make those basslines sound as good as they need to with the Kicker C12.
It’s compatible with all Super Crew Cab Trucks and has a dual sub-box enclosure that can hold up to 600 watts of power so you know it will have the volume necessary for not ending up stuck in traffic anymore.
The Kicker C12 is designed from high-quality MDF so it’s going to give you a long-lasting product that also looks better than any others on the market because this one was built just for your truck.
Nothing beats filling your Super Crew Cab with the power of a Kicker C12. For those looking for an overall bass response, but who don’t have an overwhelming amount of space to accommodate huge subwoofers, the Kicker C12 is perfect. With 600 watts peak and 12 inches in width, these black beauties are sure to hit you hard–all with no seat modifications or funky wires needed!
Which way should subwoofer face in truck?
There are a few things to consider when determining which way your subwoofer should face in your truck.
One is the size and shape of your truck’s cabin. If you have a smaller truck, then orientation may not make as much of a difference since sound will have a harder time escaping. In this case, you might want to try experiment with different positioning to see what sounds best to you.
What subs sound best in a truck?
There are a few things to consider when choosing subs for a truck. First, the overall size of the truck will dictate how many and what size subs you can fit. Second, the type of music you like will determine which kind of subwoofer is best for you.
If you are looking for quality sound, then look for subs with higher power handling capabilities. If you want louder bass, then go for subs with lower impedance. Lastly, personal preference also plays a role in choosing the right subwoofer.
Where do you put a subwoofer in a truck?
Subwoofers can be placed in a truck in different ways, depending on the make and model of the truck. Some subwoofers are mounted in the front dash, some are mounted in the rear seat area, and others are mounted under the seat.
One of the best places to put a subwoofer is in a sealed enclosure. This will help to create more accurate bass response and prevent any rattling or vibration from occurring.
If you’re not sure how to mount or install a subwoofer, it’s best to seek professional help. There are many companies that offer installation services for car audio systems, and they will be able to ensure that your subwoofer is installed correctly and safely.
Do subs sound better facing up or down in a truck?
There are a few things to consider when deciding which direction to place your subwoofers in your truck. First, you’ll want to make sure that you have enough clearance so that the subs don’t hit the roof or the floor.
Second, you’ll want to think about how the sound will travel. Facing the subs up will generally create more of an omni-directional sound field, while facing them down will direct the sound more towards the front and back of the vehicle. In general, most people find that facing the subs down gives a better overall sound quality.
How do I make my subs hit the hardest?
When it comes to making your subs hit hard, you’ve got a few options. First and foremost, you want to make sure that your subs are properly powered. If they’re not getting enough power, they’re not going to hit as hard as they could be. Second, you want to make sure that your subwoofers are properly conditioned.
This means making sure that they’re able to reproduce the low frequencies correctly. Third, you want to make sure that your subwoofers are timed correctly. This means making sure that the bass hits when it’s supposed to and doesn’t leak into other parts of the music.
How do I make my subwoofer sound deeper?
If you want to make your subwoofer sound deeper, there are a few things you can do. First, make sure that the box it is in is not too small. A larger box will result in a deeper bass sound. Second, try changing the position of the subwoofer. Moving it closer to a wall or corner will usually give you a deeper bass sound. Finally, if you’re using an amplifier, try turning up the bass boost control. This will usually give you a deeper bass sound as well.
We hope you like our top 8 of the Best Subwoofer Setup for Crew Cab Truck!